Difference between revisions of "GM Commands"

Revision as of 04:45, 31 March 2012

USING ANY OF THESE INCORRECTLY CAN POTENTIALLY CRASH YOUR SERVER

Movement Speed

Syntax

@speed value

Where value can be any number from 1 to 255. Default character speed is roughly 40, or 60 on many of the test servers.

Examples

@speed 255

Gives you the maximum possible speed (currently)

@speed 40

Sets your speed to the retail default

Effects

It will give you the 'quickening' status effect when done correctly. You can remove this effect by hitting the '+' key twice and then hitting enter on the quickening status icon.

Set HP/MP/TP

Syntax

@hp value

@mp value

@tp value

Where value is a number from 0 to (probably) 65535.

Examples

@hp 250

Sets your current HP to 250 or max if you have less than 250 total HP.

@mp 250

Sets your current MP to 250 or max if you have less than 250 total MP.

@tp 300

Sets your current TP to 300 (max).

Effects

You should observe your HP/MP/TP updating immediately on your client.

Teleport to Any Zone

Syntax

@zone zoneid

Where zoneid is the decimal (not hex) ID as listed in Zone IDs

Examples

@zone 243

Would instantly send your character to Ru'Lude Gardens

Effects

A loading screen should appear, and when finished, your character should be in the area you specified. An invalid Zone ID can cause server instability.

Walking Through Walls/Getting Unstuck

Syntax

@wallhack

Examples

@wallhack

Used once, it will turn off collision detection. Used again, it will turn it back on.

Effects

You will be able to walk through walls and to parts of the map not intended to be seen or used. If you are too far above the ground and turn wallhack off, you may become stuck rather than falling to the land below. Useful when @zone sends you somewhere and you cannot move. There is currently no way to affect your elevation with this on.

Add Items to your Inventory

Syntax

@additem value (quantity)

Where value is an ID from the Item IDs or the ID number in the item's url from FFXIAH.

quantity is an optional value, and tells the game how many of the item to give. If not given, 1 is assumed.

Examples

@additem 17644

Gives you the one-handed variant of the Judge Sword. The ID comes from the FFXIAH URL for this sword: http://www.ffxiah.com/item/17644/judges-sword

@additem 13548 2

Gives you a pair of Astral Rings.

@additem 1179 99

Gives you a stack of 99 shihei.

Effects

There is no notification that his code has worked. You will have to open your inventory and see if the item is there. It will not work if your inventory is full.

Add Key Items

Syntax

@addkeyitem value

Where value is an ID from the Key Item IDs or Map IDs

Examples

@addkeyitem 824

Gives you the key item Quartz Transmitter

Effects

There is no notification that his code has worked. You will have to open your key items list and see if the item is there. Using this may break some scripted events, but using it to add maps should be fairly safe.

Set Gil

Syntax

@setgil value

Where value is the amount of gil

Examples

@setgil 100000

Sets your current amount of gill to 100,000

Effects

There is no notification that his code has worked. You will have to open your status page or equipment page and check how much gil you have.